Overview
Starlink makes several dishes, and most accessories (power supplies, mounts, and cables) only fit some of them. This article helps you identify your dish, then shows which power, mounting, and cable options work with it, how to connect Starlink to a Peplink router, and where to get help.
TABLE OF CONTENTS
- Step 1: Identify your dish
- Step 2: Find accessories for your dish
- Powering Starlink from DC (batteries)
- Mounting your dish
- Cables and adapters
- Connecting Starlink to a Peplink router
- Starlink service plans
- Returns and warranty
- Need help?
Step 1: Identify your dish
Check your Starlink order, the label on the dish, or Starlink's own guide: What Starlink kit do I have?
| Dish | Also called | Built-in router? | Good to know |
|---|---|---|---|
| Starlink Mini | Mini | Yes (Wi-Fi built into the dish) | Small and low-power. Popular for vans and travel. |
| Starlink Standard (V4) | Standard, Gen 3, "Standard 4" | Separate Starlink router included | Uses the Starlink Cable with the standard connector. |
| Starlink V5 | The newest residential dish (2026) | Separate Router Mini included | Uses the same cable connector as Standard (V4). Not intended for in-motion use and has no DC input. |
| Starlink Performance (Gen 3) | Performance | No, add your own router | Comes with an Advanced Power Supply and its own Performance Cable. |
| High Performance / Flat High Performance | HP, Flat HP | No, add your own router | Uses a different cable and connector from the Standard and V5. |
| Enterprise | No | Uses the same type of connector as High Performance. |
Step 2: Find accessories for your dish
The quickest way is our Starlink accessories page, filtered to your dish:
- Starlink Mini accessories
- Starlink Standard (V4 / Gen 3) accessories
- Starlink V5 accessories (only items confirmed to work with V5)
- Starlink Performance (Gen 3) accessories
- Starlink High Performance accessories
- Starlink Enterprise accessories
Every product page has a Compatible With list, and that list is the final word. If your dish isn't on it, ask us before you buy.
Have a V5? Many accessories made for the Standard (V4) haven't been confirmed on the V5 yet. Product pages say so when that's the case, and we update them as testing finishes.
Powering Starlink from DC (batteries)
Starlink kits ship with an AC power supply. If you'd rather run your dish from your battery bank, which is more efficient than running it through an inverter, use the DC option made for your dish:
| Dish | DC option | Setup guide |
|---|---|---|
| Mini | Starlink Mini PoE DC Power Conversion Kit, or the 350W All-in-One PoE Injector | Mini DC Conversion Guide |
| Standard (V4) | Starlink Gen 3 DC Power Conversion Kit, or the 350W All-in-One PoE Injector | Standard Gen 3 DC Conversion Guide |
| High Performance / Flat HP | High Performance DC Power Conversion Kit, or the 350W All-in-One PoE Injector with the High Performance cable-to-RJ45 adapter | High Performance DC Conversion Guide |
| Enterprise | 350W All-in-One PoE Injector with the cable-to-RJ45 adapter | 350W DC Power Supply Guide (all models) |
| Performance (Gen 3) | The included Advanced Power Supply has a DC input | See the instructions that came with your dish |
| V5 | No DC option confirmed yet | Check the V5 accessories page for updates |
Important:
- Each conversion kit only works with the dish named on it. Kits aren't interchangeable. For example, the High Performance kit won't power a Mini.
- Wire the kit exactly as shown in its guide, including the fuse and grounding. Use a shielded Ethernet cable between the converter and the dish.
- Don't use a conversion kit together with the Starlink router or power supply, which can also send power down the line.
- The Mini conversion kit isn't weatherproof. Mount it inside or in a protected spot.
- Most kits have an optional accessory output that can also power a Peplink router, so you only need one DC run from your battery.
Mounting your dish
- Match the mount to the dish. Mounts are shaped for a specific dish and aren't interchangeable between models. Mounts made for the Standard (V4) kickstand don't fit the V5.
- Pole and ladder mounts list the pipe sizes they fit. Measure your pole or ladder rail before ordering. For example, the Mini Ladder Rail Mount fits 20–50 mm (about 0.8–1.97 in). A 2-inch pole is slightly over that range.
- Driving with the dish up? Use a mount rated for travel, and check that your dish and Starlink plan support in-motion use. The V5 isn't intended for in-motion use.
- No-drill options: magnetic feet (metal roofs), VHB adhesive pads, and suction cups suit smooth, flat surfaces. Textured roofs often need a through-bolt or adhesive mount instead. If you're not sure, send us a photo of your roof.
Cables and adapters
- Standard (V4) and V5 use the same Starlink Cable connector.
- Performance (Gen 3) uses its own Performance Cable.
- High Performance, Flat HP, and Enterprise use a different cable and connector. They need the cable-to-RJ45 adapter for third-party power supplies.
- Check the Compatible With list for the length you need. Not every length is confirmed for every dish.
- Don't cut a Starlink cable unless the kit's guide tells you how. It can affect power, waterproofing, and your warranty.
Connecting Starlink to a Peplink router
- Connect Starlink's Ethernet output to the router's WAN port. For the Mini or Standard, that means going through the Starlink Ethernet adapter or a PoE conversion kit.
- In the Starlink app, put Starlink into Bypass mode so the Peplink router handles your Wi-Fi and devices.
- Set your connection priorities in the Peplink admin panel. For example, you can use Starlink first and cellular as backup. Combining (bonding) Starlink with cellular through SpeedFusion needs an active PrimeCare license.
Detailed guides: Peplink + High Performance Starlink, Peplink + Gen 2 Standard Starlink, and 350W DC Power Supply Guide (all models).
Starlink service plans
We sell Starlink hardware, but the service plan is between you and Starlink. Once your kit arrives, activate it with the Kit ID at starlink.com or in the Starlink app, and choose your plan there. Questions about service, billing or coverage go to Starlink.
Returns and warranty
- Starlink kits that have been opened, or activated on a Starlink account, can't be returned through our standard return process. If you have an unopened kit you want to return, contact us before sending anything back.
- Dish not working? Open a support ticket with Starlink first and include your Kit ID. If you get stuck, forward us your Starlink ticket number, and we'll help escalate it.
- DC conversion kit not powering the dish? Send us the following information:
- Photos of your full wiring, from the battery to the dish
- A voltage reading at the converter's input, both with the dish unplugged and with it plugged in. Readings below about 12.4V unplugged or 12.1V plugged in mean the battery side can't supply enough power.
- Your Starlink dish model
- If a kit is overheating, blowing fuses, or smells hot, disconnect power and contact us before using it again.
Need help?
Email us at support@mobilemusthave.com or chat with us on mobilemusthave.com, Monday–Friday, 9:00 AM–6:00 PM ET.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article