Overview
A good external antenna is often the biggest upgrade you can make to a cellular setup, especially inside a metal RV or van. This article covers when you need one, how to pick an antenna that matches your router, mounting options, cables and adapters, and what to send us if you'd like a recommendation.
TABLE OF CONTENTS
- Do I need an external antenna?
- Choosing an antenna that matches your router
- Connecting the antenna to your router
- Cables, extensions and adapters
- Mounting options
- Getting cables into your RV (cable-entry boxes and grommets)
- Frequently asked questions
- What to send us for a recommendation
- Need help?
Do I need an external antenna?
- The small antennas that come with your router are fine for getting started and for testing.
- A roof antenna gets the signal outside your vehicle's walls and roof, which usually means a stronger, steadier connection. It helps most in fringe coverage areas.
- Setting up a new router or plan? Get connected with the included antennas first, then switch to your roof antenna. That way, you know the plan and router work before you add more variables.
Choosing an antenna that matches your router
Match the antenna's cellular leads to the number of cellular ports on your router. A 5G modem with 4 cellular ports gets the best results from a 4x4 MIMO antenna (4 cellular leads). A dual-modem router has 8 cellular ports. Extra leads, such as Wi-Fi or GPS, are optional.
These are the pairings we use in our own bundles:
| Router | Antenna options |
|---|---|
| Peplink BR1 Mini 5G | Peplink 40G Slim (window mount), Peplink 42G, Parsec Akita Lite |
| Peplink BR1 Pro 5G | Parsec Husky Pro 7-in-1, Peplink 42G, Parsec Akita Lite |
| Peplink MAX Transit Duo Pro | Parsec Husky Pro 7-in-1, Peplink 42G, Mobile Mark LTMWG, Parsec Akita Lite |
| Peplink BR2 Pro (dual 5G) | Parsec Great Pyrenees 11-in-1, or Peplink 82G |
Want it all on the roof? The Peplink Antenna MAX S puts a router and a 4x4 MIMO 5G antenna in one rooftop enclosure, powered over a single PoE cable. Check the listing to see which routers fit inside.
Not drilling? The 40G Slim mounts on a window, and the Akita Lite is a good portable option.
Connecting the antenna to your router
- Cellular leads go to the router's cellular ports, and Wi-Fi leads go to the Wi-Fi ports. The connectors are made so the wrong ones won't thread together properly. If it doesn't fit easily, you're probably on the wrong port. Don't force it.
- Our wiring diagrams show exactly which lead goes where for each bundle: Full Timer, Speed Demon, Road Warrior, Ultimate Road Warrior, and the Antenna MAX S assembly guide.
- Hand-tighten the connectors so they're snug, but don't use tools.
Cables, extensions and adapters
- Shorter is better. Every extra foot of antenna cable loses some signal, so mount the antenna as close to the router as you can.
- Extensions: Our antennas come with pre-attached cables, and we don't make custom lengths. If you need more length, use the shortest low-loss extension that will reach.
- Adapters: Antennas and routers use a few connector types (SMA, RP-SMA, QMA and others). They look alike but aren't interchangeable. Before you buy an adapter, send us your router and antenna models or a close-up photo of both connectors, and we'll tell you which one you need.
- Ethernet and PoE: For enclosures like the Antenna MAX S, use an outdoor-rated, shielded Ethernet cable and the power injector or splitter listed on the product page.
Mounting options
- Through-roof (locking nut): the most secure option for full-time setups.
- Adhesive (VHB) pads: permanent, with no holes in the roof. Clean and prep the surface well first.
- Magnetic: quick and removable on metal roofs.
- Pole or mast: good for getting extra height when you're parked. Check that the antenna's pole brackets fit your pole's diameter.
Our Roof Antenna Options & Mounting Considerations video walks through each option. Keep antennas a short distance from AC units, solar panels, and other antennas to reduce interference.
Getting cables into your RV (cable-entry boxes and grommets)
- Roof cable-entry boxes use grommets sized to the cable that passes through. Check the product listing for which grommets are included, and pick sizes that match your cables' outside diameter.
- Use blank (solid) grommets to seal openings you're not using yet. They can be replaced later when you add a cable.
- Seal the box to the roof with a sealant that's compatible with your roof material.
- Not sure what size you need? Send us your cable types or measurements, and we'll match the right grommets.
Frequently asked questions
Will my old antenna work with my new 5G router?
Sometimes. Older 4G antennas often have only two cellular leads, and some don't cover the newer 5G bands. A 5G router won't reach its full performance with them. Send us both model numbers, and we'll check.
Can I use my Winegard antenna or another brand with a Peplink router?
It depends on the model and generation. Some need an adapter or an enclosure such as the Basecamp to work with a Peplink router. Send us the exact model before you buy anything.
Do you install antennas?
We don't have certified installers. Local RV dealers and RV service shops are usually the best place to find someone experienced. We're happy to answer their questions too.
Will an external antenna boost my phone's signal?
Not directly. A router antenna improves the router's connection. Your phone benefits when it's connected to the router's Wi-Fi, for example, using Wi-Fi calling.
What to send us for a recommendation
- Your router model (or the bundle you bought)
- Your vehicle or roof type, and whether you can drill
- How far the antenna will be from the router
- Photos of your current setup, if you're replacing something
Need help?
Email us at info@mobilemusthave.com or chat with us on mobilemusthave.com, Monday–Friday, 9:00 AM–6:00 PM ET.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article