Peplink BR1 Pro 5G vs. BR1 Mini 5G: Which Router Is Right for You?

Modified on Tue, 17 Nov at 9:53 AM

Overview

The Peplink BR1 Pro 5G and BR1 Mini 5G are both rugged, single-modem 5G routers that run on 12V or 24V power and work with RoamLink and Starlink. The BR1 Mini 5G is the compact, budget-friendly option for lighter use. The BR1 Pro 5G is faster, has newer Wi-Fi, and includes more features without extra licensing. This article compares the two side by side and helps you pick the right one.


TABLE OF CONTENTS


Quick answer

  • Choose the BR1 Mini 5G if you mostly browse, email, and stream on one or two devices, want the lowest cost, or need a small 5G add-on for an existing network. It's the router in our Full Timer bundle.

  • Choose the BR1 Pro 5G if you work remotely, stream on several devices at once, plan to pair it with Starlink, or want the most speed and room to grow. It's the router in our Speed Demon bundle.

Side-by-side comparison

BR1 Mini 5GBR1 Pro 5G (X65)
5G modem1x 5G (Qualcomm X62)1x 5G (Qualcomm X65, newer)
Max cellular speed*5G: 3.4 Gbps down / 900 Mbps up
LTE CAT-20: 1.6 Gbps / 200 Mbps
5G: 4.1 Gbps down / 900 Mbps up
LTE CAT-20: 2 Gbps / 211 Mbps
Router throughput300 Mbps1 Gbps
SpeedFusion throughput (bonding / VPN)80 Mbps (60 Mbps encrypted)400 Mbps (200 Mbps encrypted)
Built-in Wi-FiWi-Fi 5, dual-band, 2x2 (Wi-Fi model only)Wi-Fi 6, dual-band, 2x2 MU-MIMO
Ethernet ports2x Gigabit: 1 WAN/LAN + 1 LAN3x: 1x 2.5 Gigabit WAN + 2x Gigabit LAN
Ethernet WAN (e.g., Starlink)Needs active PrimeCare or the Feature PackIncluded
Wi-Fi as WAN (campground Wi-Fi)Wi-Fi model only; needs active PrimeCare or the Feature PackIncluded
SIM options2 nano-SIM slots, Peplink eSIM, BYO eSIM (2 profiles)2 nano-SIM slots, Peplink eSIM, BYO eSIM (4 profiles)
GPSNoYes, built in (GPS antenna included)
Antenna connectors4x SMA cellular (+2x RP-SMA Wi-Fi on the Wi-Fi model)4x SMA cellular, 2x RP-SMA Wi-Fi, 1x SMA GPS
Power10–30V DC, AC adapter, or PoE input (802.3at)
Max draw: 18W (Wi-Fi model) / 13W (no Wi-Fi)
10–30V DC, AC adapter, or PoE input (802.3at)
Max draw: 19W
Ignition sensingYesYes
Docker apps (edge computing)NoYes (8GB storage)
Recommended users1–601–150
Size / weight5.0 x 4.2 x 1.4 in / 0.94 lb5.78 x 5.68 x 1.15 in / 1.59 lb
Operating temperature-40°F to 149°F-40°F to 149°F

*Maximum theoretical speeds. Real-world speeds depend on your carrier, signal, and antenna.

Speed: what the numbers mean for you

  • Router throughput is the most traffic the router can pass at once. The BR1 Mini 5G tops out around 300 Mbps, and the BR1 Pro 5G around 1 Gbps.

  • 300 Mbps is plenty for browsing, email, and streaming on a couple of devices. Strong 5G and Starlink connections can go faster than that, so the BR1 Mini can become the bottleneck. The BR1 Pro can handle the full speed of either.

  • SpeedFusion throughput only matters if you use SpeedFusion bonding, hot failover through the cloud, or a VPN tunnel. The BR1 Mini is limited to about 80 Mbps through SpeedFusion; the BR1 Pro handles up to 400 Mbps.

Wi-Fi: Wi-Fi 5 vs. Wi-Fi 6

  • The BR1 Pro 5G has Wi-Fi 6, which handles more connected devices and performs better in crowded campgrounds.

  • The BR1 Mini 5G comes in two versions:
  • Both routers can use a campground or marina Wi-Fi network as an internet source (Wi-Fi as WAN). On the BR1 Mini, this needs the Wi-Fi model plus an active license (see below).

Licensing: PrimeCare and the BR1 Mini Feature Pack

Both routers come with one year of PrimeCare. PrimeCare covers InControl 2 cloud management, firmware updates, and warranty coverage.

BR1 Mini 5G

  • These features need PrimeCare on the BR1 Mini: the Ethernet WAN port (for example, plugging in Starlink), Wi-Fi as WAN, and failover, smoothing, and bonding.

  • When the included year ends, you can keep them in one of two ways:
  • If PrimeCare lapses without the Feature Pack, the WAN port shows "license required" and Starlink or other wired internet stops working through it. Cellular keeps working.

BR1 Pro 5G

  • The Ethernet WAN port and Wi-Fi as WAN are included, with no extra license needed.

  • PrimeCare renewal is optional. It keeps InControl 2, firmware updates, and warranty coverage, and raises SpeedFusion VPN peers from 2 to 5.
  • Both routers can use Starlink as a wired internet source through the Ethernet WAN port and fail over to 5G when Starlink drops.

  • The BR1 Pro 5G is the better match for Starlink. It has a faster 2.5 Gbps WAN port and 1 Gbps throughput, and the WAN port doesn't need a license.

  • With the BR1 Mini 5G, Starlink speeds are capped at about 300 Mbps. The WAN port also needs active PrimeCare or the Feature Pack after the first year.

  • Both routers support PoE input, so you can power them from a PoE setup such as the Peplink Antenna MAX S with Starlink Mini.

Who should choose which?

BR1 Mini 5G is a good fit if you:

  • Travel casually or part-time and mainly browse, email, and stream on one or two devices.
  • Want the most affordable 5G Peplink router.
  • Already have a router or access point and just need a 5G connection to plug in (no-Wi-Fi model).
  • Need a very compact unit for a tight install space.

BR1 Pro 5G is a good fit if you:

  • Work from the road or stream on several devices at once.
  • Pair your setup with Starlink or another fast wired connection.
  • Want Wi-Fi 6, built-in GPS location tracking, or Docker apps.
  • Want a router you won't outgrow, with no license needed for the WAN port or Wi-Fi as WAN.

Both are single-modem routers, so they use one cellular connection at a time. If your work depends on calls that can't drop, ask us about dual-modem routers, which can bond or fail over between two cellular connections.

Frequently asked questions

Yes. Both routers support RoamLink with a physical SIM or eSIM. See Activating Your RoamLink Plan: eSIM vs Physical SIM for setup.

Can I use my own external antenna?

Yes. Both have 4 SMA cellular antenna connectors, so 4x4 MIMO roof antennas connect to either one. The BR1 Pro also has Wi-Fi and GPS connectors for antennas that include them.

I see an "X62" version of the BR1 Pro 5G. How is it different?

The X62 BR1 Pro 5G is the previous generation. The current X65 model adds a faster modem (4.1 vs. 3.4 Gbps peak 5G), PoE input, and Docker support, and it's slightly larger. Both have Wi-Fi 6, a 2.5 Gbps WAN port, and 1 Gbps throughput.

Will either one run on my RV or vehicle's 12V system?

Yes. Both accept 10–30V DC and support ignition sensing, so they can power on and off with your vehicle.

Need help?

Email us at support@mobilemusthave.com or chat with us on mobilemusthave.com, Monday–Friday, 9:00 AM–6:00 PM ET.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article